拉桿護弓 - FOR KAWASAKI ZX-6R and ZX10R

MLG0003

新商品

拉桿護弓 - FOR KAWASAKI ZX-6R and ZX10R~ 全富重車 HAVE ALL MOTOR

更多資訊

1 項目

NT$ 1,880 含稅

更多資訊

最初設想在Moto2,

但現在被世界各地的幾乎每個摩托車車身(ACU,MSVR,FIM,AMA)和賽車所需,

“拉桿護弓”是開發,

以幫助避免前剎車/離合器桿在關閉輪(通過意外接觸另一輛自行車或甚至騎手),

但同樣可以應用於道路騎行,

保護你的槓桿從過濾鏡面罷工;再次潛在地導致制動/離合器接合。

R&G拉桿護弓 易於安裝(就像R&G Bar End Slider一樣安裝)只需幾秒鐘。

這種特殊設計結合了超強的強度和輕便的性能,

由於其註塑設計允許賽車認可​​的保護您的道路或軌道自行車。

像許多種族導向的產品,

這些古怪的種族定制的產品現在已經從道路走向道路;

所以無論你是一個職業賽車手,

一個軌道天愛好者或只是一個道路騎手!

一個R&G拉桿護弓是必須有配件。

R&G拉桿護弓 主要特徵 由Moto Rapido BSB團隊使用。

符合FIM賽車規定。 由堅韌和柔韌的尼龍級製成。

有5種顏色(黑色,藍色,紅色,橙色,綠色)。

適用於離合器和製動桿側。

由杜邦®Zytel®70G33L尼龍製成 提供定制和賽車欄應用所需的所有硬件。

該R&G拉桿護弓套件可以安裝在製動器或離合器側,

並配有我們的自行車專用適配套件,

適用於川崎ZX-10R('06 - ),ZX-6R('05 - ),川崎H2和川崎H2R 2015-型號,

牢固地固定在適當位置,並提供一系列的顏色選擇。

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement. R&G Moulded Lever Guards Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory. R&G Moulded Lever Guards Key Features As used by the Moto Rapido BSB team, among others. Compliant with FIM racing regulations. Made from a tough and flexible grade of nylon. Available in 5 colours (black, blue, red, orange, green). Fit to both clutch and brake lever side. Made from DuPont® Zytel® 70G33L Nylon Supplied with all required hardware for the bespoke and racing bar applications. This R&G Moulded Lever Guard kit can be fitted to either the brake or clutch sides and comes with our bike specific fitting kit, suitable for the Kawasaki ZX-10R ('06-), ZX-6R ('05-), Kawasaki H2 and Kawasaki H2R 2015- models, holding it securely in place and is available in a range of colour options.