摩托車加熱手柄 - for Suzuki SV650 Unfaired (2016 (L6))

HG000122C

新商品

Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)

更多資訊

1 項目

NT$ 1,880 含稅

更多資訊

摩托車加熱手柄(用於22mm / 7/8英寸手把/剪刀)(HG000122C) 獲得RiDE雜誌最佳購買獎狀。

R&G加熱手柄幾個月增加幾個月的摩托車季節和舒適幾乎任何乘駕,

輕鬆安裝電子線路和5熱設置調整,

您可以優化熱輸出,以滿足您的需要。

適合22毫米(7/8英寸)直徑的手把/剪貼畫,

長度為124毫米(4.9英寸)(最常見的手柄尺寸為sportboikes,enduros和踏板車)。

在僅僅2分鐘內,夾具加熱到35°C(95°F),

並且在那些真的寒冷的天氣,

增加熱定形(使用易於使用的控制箱)以獲得溫暖到達60°C(140°F)只是兩個點!

包括熔斷,預端接線束,

用於連接摩托車電池或開關直流電路。

注意:這些加熱夾具的最大功耗為每對4.0安培(48瓦)。

為了使手柄獲得最佳性能,

我們建議您使用R&G夾緊膠(另行選購)安裝它們,

並將開口桿的端部用附帶的塞帽密封或用R&G棒端滑塊密封。

提供2個加熱夾具,

可調控制單元,線束,安裝支架和安裝說明。

Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons) (HG000122C) Awarded RiDE magazine Best buy award status. R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs. Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those really cold days, increase the heat setting (using the easy to use control box) to get warmth up to a toasty 60°C (140ºF) is only afew taps away! Includes fused, pre-terminated wiring harness for connection to your motorcycle battery or switched live circuit. Note: Maximum power consumption for these heated grips is 4.0 amps per pair (48 watts). For optimum performance of the grip we recommend installing them using R&G grip glue (available separately) and sealing the open bar ends the supplied plug caps or with R&G Bar End Sliders. Supplied with 2 heated grips , Adjustable control unit, Wiring harness, Mounting bracket and installation instructions.

Product Code:HG000122C